How To Test A 4wd Actuator Chevy Truck? (Easy Steps)

A 4WD actuator is a component of a Chevy Truck that helps the vehicle to move in four directions. It is responsible for turning the wheels in the four directions, which allows the truck to move forward, backward, left, and right.

Everything this equipment does is heavy work, so it is prone to face faults. In that case, you may have to test it to know its condition. But how to test 4WD actuator on Chevy truck is not known to us. Most of us can’t test this because there is no such clue.

This discussion is aiming to help you test this equipment for your Chevy truck. After reading this, you will be able to identify a bad or good 4wd actuator very easily, and the Chevy truck will perform very well. Some more information is here for you.

How To Test a 4wd Actuator On a Chevy Truck?

Testing the 4wd actuator on the Chevy truck is nothing that requires special workflow maintaining a specific method. But it can be said to be difficult to determine the extent of damage without performing an inspection or test.

In some cases, it may be necessary to remove the actuator in order to inspect it properly. Here are a few tips that can help you test the 4wd actuator on a Chevy truck. Let’s see the process.

Step 1: Locate the Fatter Wires

To test this element of your engine, we have to provide an electric connection to our 4wd actuator for a few seconds. This will tell us about its condition. To do that, we need to locate fatter wires first.

There are two fatter wires in a 4wd actuator. One is red and another one is black. We have to find both of them.

Step 2: Provide Electric Connection

Now connect the red wire to the electric source and the black one to the soil. The connection should be for one or two seconds. If the connection is kept for a long time, some damage may happen.

Step 3: Inspect The Activity

After connecting the wires to the electric source and ground, if it works then this is good. But if it fails to work then some issue is there. That issue may be on the actuator or its connectors. You have to think about the solution after you have done this.

This is how to test a 4wd actuator on a Chevy truck. There is no trick here. You just need to have some experience to understand its present condition.

How To Tell If A 4wd Actuator Is Bad?

There are a few ways to determine if your actuator is bad. The better process is observing its normal working flow. If this component is working normally then it should be normal. Yet some symptoms are there to tell if the 4wd actuator is bad or not.

The first is to check the movement of the actuator. If the movement is not normal, it means the actuator is not working and needs to be replaced. You will be able to check this while driving the truck.

The second way to determine if the actuator is bad is to check its activation. If the actuator is bad, it will not become active, it means the actuator is bad and needs to be replaced. Finally, you will get another sign of a bad 4wd actuator. That is getting stuck. If this gets stuck, your 4wd actuator may be bad.

What Causes 4WD Not Engaging?

Any fault with the 4wd actuator may cause this problem. But there are a few potential causes of 4WD not engaging, and each requires a different solution. One potential issue is any technical issue. 

This may be caused by a number of things, including any problem with the electric connection or faulty wire, or any problem with the circuit. If the electric connection has any problem, the 4WD will not be able to engage the gears, and it will be difficult to move the vehicle.

If the engine is not running correctly, the 4WD will not engage. This may be caused by a dirty 4WD transmission. Over time, this can build up dirt and debris, which will cause the 4WD to struggle to engage. 

Unusual use of traction on off-road may increase this problem with a 4wd actuator on a Chevy truck. So, be careful while driving on snow or in rough areas. Your indifference will lead to your damage.

How Do I Know If My 4WD Is Working?

If you are like most drivers, you probably check your 4WD’s status at least once a month. However, if you are not sure whether your 4WD is working properly, it is important to take action.

Checking your 4WD’s status can help you to identify any problems early and prevent them from becoming bigger problems. In that case, the testing method will help you the most. Besides that, you will get some symptoms of 4wd’s activity. They will give you a better understanding of it.

The first symptom of a working 4wd is the driver’s feeling. An experienced driver will easily feel the activity of this feature of a truck. If 4wd engages properly, the left and right wheel will bend properly when it is needed. The vehicle’s motion will be normal too.

If the driver has previous experience driving this featured truck, he will not even need to come out of the driver’s seat to understand whether the 4wd is working or not.


All the symptoms of a bad 4wd actuator will help you understand its condition. But to be 100% sure, you may apply this method to your Chevy truck. We hope this method will help you a lot.

Some people use different scanning tools and meters to test this element. But there is some doubt about these methods. So, you must try this one. That was all for today.

Related Posts: