How To Change Front Wheel Bearing On Chevy Silverado 2WD?

Do you know what saves you every single time from the brink of an accident? It is the front wheel bearing on your Chevy Silverado. Hence, it can be a problem if it is faulty.

Did you just ask how to change the front wheel bearing on Chevy Silverado 2WD?

It’s actually quite simple, to begin with, lift the Chevy truck using a jack, followed by removing the front wheel. After the brake calipers are exposed, get them off as well.

Remove the rotor followed by the bearing hub by unscrewing them. Lastly, install the new bearing unit and reinstall the other parts and the front wheel back in place.

This was only a short insight on this topic. Keep an eye out through this write-up for further elaboration.

Front Wheel Bearing Replacement Cost On Chevy Silverado 2WD

The auto market nowadays can be quite misleading and unpredictable. Hence, a delightful set of guidelines are always a welcome addition.

Let’s look into the costs associated with replacing the front wheel bearing on your Chevy Silverado 2WD, shall we?

Mechanic Cost

The task of replacing the front wheel bearing on your Chevy Silverado 2WD could sometimes sound daunting. But hey!

If you have the cash to spare to get the job done by a mechanic, then you’re in for a treat. The labor cost for this job typically ranges from $148 to $187

The cost mentioned above is just an estimation and may vary depending on your location in the US. Hopefully, we’ve saved you the hassle of researching the mechanic cost.

This might help you make better future decisions based on your given budget as you could always pick the route to do this on your own.

You heard us right; it’s completely possible to replace the front wheel bearing of your 2WD Chevy on your own. This would even help you learn a new skill and save a few hundred bucks.

Parts Cost

Now, since we’ve dealt with the labor costs for the replacement process, let’s push that aside for now and move on to the cost of parts. Especially since prices are likely to be really high.

It’s imperative that you buy your parts from well-known brands that serve the specific model of your Chevy 2WD. Typical prices of parts may range from $40 to $190.

Brands such as AM Autoparts, 1A Auto, ACDelco, Detroit, Autoround, and some others are the favorite of most Chevy drivers. Check the links below to grab one for your Chevy as stocks clear out frequently.

  1. Autoround 515054 Wheel Hub and Bearing Assembly
  2. Detroit Axle – 2WD Front Wheel Hub Bearings 

Tools Required To Replace Front Wheel Bearing On Chevy Silverado 2WD

No matter how hard you try, it’s impossible to replace the front wheel bearing on your Chevy without the essential tools. So let’s get our tools in check, shall we?

Without further ado, let’s look into the list of required tools.

  • A jack
  • The screwdriver kit which consists of flathead screwdrivers as well
  • A brake cleaner and wired brush
  • A set of socket and torque wrenches
  • A ratchet
  • A hammer and chisel
  • Lastly, the specific part that is required in order to complete the replacement.

How To Replace Front Wheel Bearing On Chevy Silverado 2WD?

Let’s admit it; there’s only a handful of you who like to replace their vehicle parts by themselves. There’s no denying this fact.

However, as tedious as the job can seem, it adds more certainty when you do the job by yourself. Hence, to make the replacement process feel like a breeze to you, we’ve prepared the steps below!

Step 1: Jack Up The Truck And Remove The Front Wheels

Take out the jack which you typically use to replace tires. Use it to lift your Chevy Silverado off the ground level. Then follow it up by removing the front wheels.

To take the wheels out, you simply have to unscrew the bolts securing the wheels, using a socket wrench, and then pull it out. 

Make sure to keep track of the removed screws and bolts, as losing them can be quite heavy on the pocket.

Step 2: Disconnect The ABS After Removing Brake Caliper and Rotor

Once the wheels are removed, you will be able to see the brake calipers. Now you may use the socket wrench or ratchet to remove the bolts holding the caliper in place.

Then use a flat head screwdriver to get the caliper off the brake system. After removing the brake caliper, it’s time to remove the rotor.

If the rotor doesn’t come out easily, be sure to hammer the contact points on the rotor, and then it should slide off. After that, get the dust cap out of the way by wheeling it out.

Follow the trail of the wiring harness from the back of the bearing unit and then disconnect the wired connectors at the end to ensure disconnection of the ABS sensor.

Step 3:  Remove The Faulty Bearing Hub From Your Chevy Silverado

Since the dust cap is out of the way, it’s time to remove the axle nut. You could simply remove it using a socket wrench or a socket power tool if you have one.

Now there should be bolts both at the back and the front of the bearing hub. You could use a ratchet and socket wrench to loosen the bolts. But what if the hub doesn’t come off easily?

Then use a chisel and hammer and try to separate the hub from the axle. After almost 6 minutes of pounding, it should eventually come off. This can be quite boring at times. So stay patient!

Step 4: Install The New Bearing Unit On Your Chevy Silverado 

Make sure to align the new bearing hub properly so as not to damage the new ABS sensors on it. Connect all the wired clippings properly and tighten the bolts on the new hub.

Using a torque wrench to tighten the bolts doesn’t seem like a bad idea. Make sure to clean the region of the installation properly with a wired brush and brake cleaner.

Reinstall all the essential units along with the front wheel to make your Chevy Silverado 2WD front wheel bearing replacement completely.

Conclusion

The front wheel bearing not only reduces the friction in the wheels of your Chevy but also prevents any accidents. Hence, it’s crucial to give it the routine maintenance and attention it deserves.

Hopefully, if you’ve kept a keen lookout throughout this write-up then you should be able to change the front wheel bearing on your Chevy Silverado 2WD on your own.

It brings us great joy to help you with your idealistic quest of replacing the front wheel bearing. You could even opt for the luxury of getting it done by a mechanic.

But do make sure to never get your ride on the road with a faulty or rusted front wheel bearing. Paying attention to such little details could save you fortunes ahead.

Related Posts: