How To Change Front Rotors On Ford F350 Dually? (Easy Steps)

Front rotors are important metal discs attached to the wheel hub to control the braking system of your Ford. While you can indeed change these rotors, keep in mind that it is not an easy process. 

For starters, you need to start by measuring the thickness of your existing rotor when changing. Then install new ones of the same size and thickness. Once installed go on a test drive for assurance and integrity. 

However, that is not all there is to change the front rotors on a Ford F350 dually. Scroll down below and keep reading to get a hang of the things you might need to expect during this procedure. 

Total Cost To Change The Front Rotors On Ford F350 Dually

The total amount of money that you will be required to spend on changing the front rotors on your Ford will depend on the quality of the new parts and what gears exactly you will be changing. 

The cost of singular parts like the rotor or braking pads might not be much on their own. They are typically around 50-100 USD. If you are going to replace the entire front rotor of your Ford, this will cost you 250 USD. 

In addition to the cost mentioned above, you will also be required to pay an extra amount of money if you are going to hire professional mechanics for the task. This labor cost will set you back at around 300 USD. 

Unless you are going to change the front rotors of your vehicle by yourself, expect to be paying around 600 USD or more. Otherwise, you will be spending a maximum of 250 USD. 

Tools Required To Change The Front Rotors

There are quite a lot of tools that will be involved in the procedure. Of course, you won’t be required to use all of them since we are including the ones we think are going to be the best based on our opinion. 

Additionally, you can also alternate between different tools than the ones mentioned here as long as the purpose of usage is being met. We have listed the tools you should expect to use below:

  • Jack or hydraulic Ramp
  • Ramp
  • Screwdrivers
  • Wrenches
  • Spanner
  • Brake pads
  • Rotors
  • Spanner
  • Calipers

How To Change Front Rotors On Ford Rotors On Ford F350 Dually?

Now that we are done explaining all the tools and a little of what you should expect from this task, we can move on to the main procedures. Below is the step-by-step guide that you will need to follow for the change. 

Step 1: Safety First

The first step is the safety step where you must make sure that your Ford has been de-sparked and all live wires and electric sources have been switched off. 

Step 2: Lift The Vehicle

Make use of a floor jack or hydraulic ramp to lift the front of the truck above the ground. Make use of ramps to allow the vehicle to sit up for long periods. 

Step 3: Remove Wheels And Bolts

First, start with removing the wheel of the truck. You can do so by using a wrench to remove the nuts and lugs attaching the wheels to the Ford on both sides. Move on the bolts inside and remove them as well. 

Step 4: Measure The Thickness Of The Existing Rotor

Make use of calipers to take measurements of the rotors that exist on both sides of the truck. Then look for a new rotor of the same size. If the rotors are oversized, they will never fit the brakes in your vehicle. 

Step 4: Remove The Old Install The New

Remove the old rotors making use of the spanner and screwdriver and replace them with the new ones. Also, place the brake pads properly. Push them in slightly so that they stick tightly. 

Step 5: Re-attach Back

Once you have replaced the accessories that needed to be replaced, you can reattach the tires back to their place. Make sure to screw the parts tightly and bolt them back securely. 

Step 6: Go On A Test Drive

Simply replacing the truck might not be the end of all things. Start the power source inside the truck and go on a test drive to ensure that everything works properly. 

Safety Tips When Changing the Front Rotors

In addition to the guide mentioned above, there are several tips that you can follow. 

Not only will these tips make your repair easier and more convenient, but they will also allow you to be safe even in the direst points of the truck. 

We have compiled some of the more important tips that you will surely benefit from and listed them below using bullet points. 

  • If the brakes appear spongy, change them immediately since this is a sign that too much air must have gotten into the hydraulics.
  • Always remove any energy sources when working on fixing any part of the truck
  • Listen for sounds of grinding or scalping when working on the rotor.
  • Make sure that the brake pads you are fixing meet the requirements set by your local drivers’ association or government.
  • Always test out the truck by driving it after you have changed the rotor. 

Conclusion

According to world statistics, each year more than 1.35 million people die due to road accidents. 

That is why it is vital that you ensure the best possible quality of the brakes and the rotors involved with the brakes. 

However, we are aware that not everyone might be up for replacing the front rotors in their Ford by themselves. 

If you are one of them you’re more than welcome to hire a mechanic to help you out. 

However, do be prepared since the extra labor will cost you a lot and possibly more than the cost of the parts. 

Even then do not delay changing the rotors since your life might depend on it.

Related Posts: