How To Change Front Brake Pads on Dodge Ram 2500?

Brake pads are a vital part of a vehicle. The Ram 2500 has many elements that set it apart. But, like the brake pads, its internal components require frequent maintenance or replacement. 

That’s why knowing how to change front brake pads on a Dodge Ram 2500 truck will save you a lot of time and headache.

Start changing the front brake pads simply by loosening the lug nuts and using a floor jack to lift the truck. Now, remove the caliper bolts and install the brake pad retainer clips. After that, you can replace the brake pads.

Truck brake pads assist the vehicle in stopping after a long run at a constant pace. It relieves the stress of driving. 

The brake pad is the car’s most powerful stopping component. So, these components must be examined regularly and changed if needed. 

Front Brake Pads Replacement Cost on Dodge Ram 2500

The cost of brake pads ranges from $200 to $500, depending on the extent of the modifications you wish to make to your vehicle. The price ranges from modest to expensive depending on your needs.

You may have a car with a pricey set of brake pads. So, unfortunately, you’ll have to bear it. In addition, the price might rise if you use more expensive materials, a higher-end brand, or a higher-end build.

Mechanic Cost

If you want higher-quality brake pads, be prepared to pay more. Moreover, if you’re willing to pay a premium price for a brand’s quality and guarantee, your costs may still rise.

Brake pads’ pricing might also arise due to differences in manufacturing processes or product quality. The overall labor expenses are projected to be between $67 to $85.

However, you can minimize this cost if you gather all the knowledge required to change the brake pads and do it yourself. And you don’t have to worry because the procedure is actually quite easy.

Parts Cost

A high price for brake pads isn’t unusual if the production process is rigorous and clean. Depending on where you live, the price of a product may differ significantly.

Because these things are so valuable, they must be sent and stored for a certain period of time. This then results in a high overall cost.

Parts required to change the brake pads can cost around $400. You can get a floor jack like the BIG RED T820014S and an impact gun like Avid Power 20V Max to minimize the cost. Both of these can do a great job at a very reasonable price.

Tools Required to Replace Front Brake Pads on Dodge Ram 2500

You’ll need a few tools for this project before you start working, so go out and buy them. These will make the procedure a lot easier for you to complete.

The tools you need are:

  • A floor jack
  • Jack stands
  • An impact gun
  • WD-40
  • 15/16″ socket
  • 7/8″ socket
  • A cheater pipe wrench

How To Replace Front Brake Pads on Dodge Ram 2500?

Replacing front brake pads isn’t that difficult. You just have to follow a few simple steps. This doesn’t require any major technical skills either. Here are the steps to follow:

Loosen the Lug Nuts

First, you must remove the wheels to access the brake pads. But before that, you’ve to get rid of the wheel bolts. For now, just loosen them and follow these instructions:

Step 1: Use the impact gun to loosen the nuts

Step 2: Loosen the lug nuts using a 7/8 socket

Step 3: Now, remove them

Lift the Truck

It’s not a simple job when it comes to lifting the vehicle. If you screw up the procedure, things might get out of hand. So be cautious while doing so.

Step 1: Pull the front side up using the floor jack, and then set the stand under it

Step 2: Lower the car onto the stand

Step 3: Now, move the opposite side and support it with a stand to keep it in place

Step 4: Make sure the car is immovable by giving it a good shake

Remove The Caliper Bolts

You’ve to remove the caliper bolts before putting your hands on the brake pads. Beware of corroded bolts as they might be difficult to remove. To remove the bolts, do as follows:

Step 1: Drench the bolts with WD-40

Step 2: Use a 15/16″ socket and a cheater pipe to break it free

Step 3: Remove the bolts located at both ends

Step 4: Now remove the brake pads

Installing Retainer Clips

Brake pads consist of retainer clips that help bind the pads. You’ve to Install the retention clips as mentioned below:

Step 1: The caliper requires four tension clips. So, split them as each of them are unique

Step 2: Check out the old ones to know their exact positions

Step 3: Insert the clips into the mounting bracket notches

Step 4: Fit the clips with care. And if the clips aren’t fitting, you’re most likely doing it incorrectly

Replacing the Brake Pads

Now comes the time of adjusting the brake pad springs. Here are the necessary steps:

Step 1: Locate the springs behind the caliper bolt

Step 2: Bend the springs slightly and allow them to snap back into place

Step 3: Be cautious while trying to bend the springs

Step 4: Repeat this for the other pads

Step 5: Replace the nuts and set the caliper

Step 6: Restore everything in the exact order

Conclusion

It’s a simple task to replace the brake pads, despite how frightening it may seem. While the first learning curve may be steep, the following steps will go much more smoothly after getting the hang of it. You’ll become an amateur brake pad mechanic in no time.

And now, as you know all about how to change front brake pads on Dodge Ram 2500 at home, you won’t even have to rely on professional help. So, get ready to get your hands dirty and replace those brake pads yourself!

Related Posts: