How To Adjust Camber On Chevy Truck? [5 Easy Steps Guide]

If you’re not getting your desired performance after changing areas with different road types, you might be having issues with the camber. Unfortunately, you can’t throw away your camber when this situation takes place. 

What you can do is adjust the camber. If you’re wondering how to adjust camber on a Chevy truck, this article is for you. In this article, I’ll be mentioning how to do that in a step by step manner. 

Camber: Types Of Chevy Truck Camber

Camber or camber angle is the inward or outward tilt angle (measured in degrees) between front & rear wheels. 

You can choose to have the specific tire alignment according to your need. To do such a thing, you’ll have to adjust the camber angle. 

Talking about the types, there are three types of camber – Positive, Negative & Neutral Camber. Here’s the short summary of these camber types:

  • Positive Camber: If the top part of the wheels are closer together, it’s a positive camber. 
  • Negative Camber: If the bottom part of the wheels are closer together, it’s a negative camber.
  • Neutral Camber: If the wheels remain strictly parallelly, it’s a neutral camber. 

Why Do You Need Adjust Camber On Chevy Truck?

The Chevy truck manufacturer can’t make every vehicle customer friendly when it comes to camber. That’s why there’s an option available for everyone, which is Camber Adjustment or Wheel Alignment. 

Suppose your vehicle was made for running on a straight road for a longer period with little to no cornering. In that case, you’ll be given the positive  camber. However, if you’re up to exploring areas that require massive cornering, adjusting to negative camber is the only safe option. 

What Is The Best Camber Angle On Chevy Truck?

The best camber angle on a Chevy truck fully depends on your needs. If you’re using your truck as an agricultural vehicle or tractors, positive camber will suit you the best. 

On the other hand, you’re someone who loves curvy roads that require lots of cornering – go with the negative camber. You can also try hybrid camber that will allow you to taste both positive & negative camber at once. 

How To Adjust Camber On Chevy Truck: 5 Steps Guide

Adjusting camber on a Chevy truck is fairly simple if you have the proper tools needed. Here are the things you’ll need while adjusting camber on your Chevy truck: 

  • A Wrench Set
  • A Socket Set
  • An Impact Gun
  • An Alignment Machine (or, Camber Gauge)

Considering you’re ready with the equipment mentioned above, let’s get started with the guide on how to adjust camber on chevy truck:

Step 1: Measure The Existing Camber Angle

Before doing anything to the camber, you’ll have to know the situation first. Take your alignment machine or camber gauge & measure the existing camber angle. 

By measuring, you’ll know the camber type as well – positive, negative or neutral. Later on, you can decide your desired camber angle & act accordingly. 

Step 2: Detach The Front Tires

Though you can work on both front & rear wheels, with a Chevy truck – doing the front wheels is enough. 

Before detaching the front tires, you’ll have to lift the front part of the car using a jack. Later on, you’ll have to detach the front tires of your chevy. 

Step 3: Check For Arm Mounting Bolts

Inspect the frame & look for arm mounting bolts. You’ll find bolts on both sides of the frame. 

Finally, check for a camber alignment pin & you’ll find it as an extension of the frame. This extension along with the arm mounting bolts will help you level the camber.   

Step 4: Loosen The Upper Control Arm 

Use your socket & wrenches to loosen the upper control arm. By doing so, you have already done the 80% of the camber adjustment job. 

While loosening the upper control arm, keep an eye on the alignment pin & check when it reaches the perfect position. 

After getting your desired camber angle, tighten the upper control arm again & you’re all set. 

Step 5: Check & Finalize Camber Angle 

After doing everything to adjust the camber, it’s time for checking & real life testing. Release the jack & put your vehicle on the ground. 

If you’re noticing everything is fine, congratulations – you’ve done it. Otherwise, repeat the process again & complete your camber adjustment operation.  

It’s worth mentioning that only doing the front wheel part is enough for most vehicles. If you want to do the rear wheels as well, you surely can. 

However, you’ll have to lift the bottom part of the vehicle using the jack & the rest of the work is the same. 

Frequently Asked Questions – FAQ

Can You Adjust Camber Without Camber Kit?

Yes you can adjust camber without a camber kit. Though a camber adjustment kit can firmly help you with the process, you can do that with other household tools too. 

How Much Does A Camber Alignment Cost?

If you’re getting the alignment done from an auto shop, expect to pay around $30 to $50 per wheel. That means you’ll have to pay around $120 to $200 for doing the full camber alignment. 

How Much Negative Camber Is Bad? 

Though the purpose of excessive negative camber varies from person to person. However, you should never exceed the three degrees mark while adjusting the negative camber. 

Conclusion 

I hope this article was helpful enough to satisfy your query on how to adjust camber on a Chevy truck. I’ve mentioned everything you need to know while adjusting your own Chevy camber. 

Now you can do the work on your own or hire someone who can do it better. The cost of camber alignment isn’t high enough & you can definitely ask out for help without breaking your bank.

Related Posts: