In recent years, the electronic parking brake has begun to successfully replace the traditional mechanical brake. However, there are certain disadvantages to using an electronic parking brake. The electric parking brake problem might be caused by common issues such as low voltage in the system or an open fuse.
Instead of a standard lever next to the driver’s seat or left pedal, the electric parking brake (EPB) features a tiny button that initiates a complex stopping system. It adds numerous beneficial functionalities to contemporary automobiles and makes them easier to run.
Also, the electronic parking brake is intended to keep the car from rolling away inadvertently once it has stopped. It also satisfies the legal requirement for a second, independent vehicle braking system as well as extra safety and comfort features.
When the Honda Civic braking system malfunctions, the error message “Electric parking brake problem” shows. Continue reading to learn more about the causes of the electric parking brake problem and how to solve it.
- 1 How The Electronic Parking Brake Works
- 2 Pros and Cons of the electric parking brake system
- 3 Use of electric parking brakes
- 4 How To Fix Honda Civic Electric Parking Brake Problem
- 5 Electric parking brakes have technical issues
- 6 How To Reset The Electric Parking Brake On Honda Civic
- 7 Frequently Asked Questions
- 8 Conclusion
How The Electronic Parking Brake Works
The electric parking brake’s working concept is cyclic since it continually alternates between on and off. The electronic handbrake is activated when a button in the passenger compartment is pressed. When engaged, the electric parking brake locks the wheels due to servo motors on the wheels.
The electronic actuator then engages and locks the brake discs of the car. The EPB mechanism operates by repeatedly opening and shutting the rear axle until the vehicle comes to a halt. Also, this braking system communicates with the actuator and the electronic control unit.
When the vehicle is immobile for an extended period of time, the electric parking brake engages.
When the doors are opened, the ignition is turned off, and the seat belts are unbuckled, the same thing happens. When the car begins to drive, the electric parking brake is likewise disengaged automatically.
Furthermore, the driver can disengage the system by pressing a button. It should be noted that this process offers both advantages and disadvantages.
Pros and Cons of the electric parking brake system
The biggest benefit is that there is more room in the cabin, and the area appears more appealing also the electronic park brake works well on both the front and rear wheels.
The EPB is also more efficient and accurate than a traditional emergency brake system.
Other advantages include:
- Simple and straightforward functioning.
- Improved degree of safety.
- There is no need to manually adjust the handbrake.
- When starting to drive on a slope, there is no risk of vehicle rollover.
The biggest drawback of this device is its exorbitant cost. Automobiles with such equipment cost significantly more at the dealership than cars with the basic handbrake.
Among the other drawbacks are:
- High failure chance.
- There is no way to separately modify the braking force.
- Increased difficulty in changing brake pads.
- The system will stop operating if the battery dies.
- Costly maintenance and repair.
Use of electric parking brakes
To use the electric parking brake, press the EPB button next to the gear lever labeled “P”.
Doing this engages the system, which must then be disengaged by pushing the button down while releasing the brake pedal.
To release or disengage the electric parking brake system, you must depress the brake pedal and then press the EPB button down.
Doing this deactivates the electric parking brake while also turning off the emergency light on the instrument panel.
Simply fasten your seat belt and push the emergency brake system button. Then, shift into drive and press the brake pedal switch. The parking brake will disengage automatically.
How To Fix Honda Civic Electric Parking Brake Problem
Honda Civic owners may run into an error with the electric parking brake called the “Electric parking brake problem.“
Whenever this happens, a warning light and beeping sound will display on the dashboard. Several Honda Civic owners have expressed dissatisfaction with the new braking system.
Main casuses of electric parking brake problem:
- Wire that is dirty or rusted.
- Worn parts or connections.
- Faulty parking brake switch or selection lever.
- Corroded parking brake cables. This is a fairly typical issue with the Honda civic braking system.
- Poor installation techniques.
Here are some problems and solutions for the electric brake problem:
1. Park your vehicle
Before to beginning troubleshooting, the first thing you should do is try not to panic and drive to the side of the road or shoulder.
You can park on the right side of the street. If there is no curb, park as close to the side of the road as possible.
It is advisable to use the inertia along the road to park the car at the curb. Then, as described in the general directions for stopping the automobile, activate the alarm and mount the emergency sign.
2. Faulty Wiring Issues
Faulty wiring or improperly connected, a electric parking brake problem might arise. Additional clipping methods that link components also need to be accounted for.
When working with electrical system wires, this typically doesn’t present any challenges. However, sometimes it can cause issues so use caution when faced with issues like this.
3. Servo Motor for the Caliper’s Parking Brake
When the emergency brake is activated, a servo motor on the wheels forces the wheels to lock. Parking brake systems were once mechanical and cable-driven, but today’s systems are servo motors driven.
When a servo motor fails, it indicates that it must be replaced. It is not difficult to replace servo motors. Some Honda owners do it on their own.
However, if you don’t know how, it’s advisable to seek assistance from a skilled technician or bring your vehicle to a Honda repair shop.
Dirt or debris lodged in the center console, producing a faulty button or switch, is a typical cause of Honda electric parking brake mistakes.
If liquids or other debris fall on the button, the device may become dysfunctional. It is feasible to get access to the center console inner workings and replace the broken button with a new one.
Before repairing an electrical system component, such as a fuse, it is critical to reset all of the components that may be faulty.
Check all fluid levels and replace any that are low, particularly those in the braking and hydraulic systems of the vehicle.
5. Make sure the cable connectors are free from damage
Typically, a faulty or worn electrical connector is the cause of many Civic electric parking brake faults.
If this is the case with your vehicle’s wiring, first inspect the cable connectors to see if they are at fault. Alternatively, a common cause of electric parking brake faults is damaged cables.
When the cables that connect the electric parking brakes on your Honda Civic break, it can cause damage to the vehicle or even render it inoperable.
It’s important to replace these cables when they expire so that you can avoid electric parking brake problems in the future. Additionally, replacing these cables will resolve any current electric parking brake problems with the car.
Electric parking brakes have technical issues
Unfortunately, the electronic parking brake’s main drawback is its considerably more sophisticated design and functioning concept, as well as the frequency of possible malfunctions.
It is worth mentioning that such a system is now far more common than the previous classic technique based on a manual mechanical handbrake.
For example, all vehicles equipped with an automated stop-hold system now use solely the electronic handbrake. Because of the more sophisticated design, there is a higher danger of failure.
How To Reset The Electric Parking Brake On Honda Civic
Let’s go through how to reset your Honda Civic electronic parking brake system.
These instructions are unique to Honda Civic. However, the procedures are largely the same for other cars.
They include the following:
1. Start the car engine
Before moving into PARK, start the vehicle and engage the transmission by pushing the gearshift into place. Be sure to avoid pressing down on the brake pedal when shifting gears.
2. Electronic parking brakes must be turned on before use
Electronic parking brakes can be activated by pulling the button and then releasing it.
It’s important to keep in mind that this process must be repeated twice. Press and hold the electronic parking brake button until you hear a beep indicating the mechanical one. Once you hear it, release the button.
When finished, give the button a final push and hold it down for 5 seconds. After two distinct beeps from the inner electronic system, release the button and keep holding it for another 5 seconds.
Frequently Asked Questions
What causes electric parking brake problem?
Most often the cause of electric parking brake problem is voltage and fuse, you can check the resistance between the electric parking brake and the module by insulating one end of the wire with your finger.
Also, a defective center console switch or button, poor wiring, or a worn out caliper parking brake servo motor may be the source of the electric parking brake problem in some circumstances.
Also, every two years, lubricate all moving parts of each electric parking brake – such as cables or switches. Any wires or other parts that look broken or suspicious should be replaced.
What happens when electric parking brake fails?
When electric parking brakes fails the error message “Electric parking brake problem” appears. In the event of an error that persists or doesn’t clear, a mechanic must be consulted.
Failure of the electric braking system might result in accidents, posing a major risk to pedestrians and driving. Serious problems are conceivable.
As a result, it is vital to avoid driving with bright indicators.
How do you diagnose parking brake problems?
The parking brake should be checked at intervals of once a month. The safe operation of your vehicle requires that it be in serviceable condition at all times.
There is another way to check the serviceability/failure of the parking brake. The handbrake should be raised to the stop, put in first gear, and then gently release the clutch. A stalled engine will indicate that the brake is in working order.
If there is no slope or hill nearby, you can check the state of the handbrake as follows. Place the car on a level surface, activate the handbrake and put it in neutral.
Then get out of the car and try to push it. If the car does not move, the parking brake does not need any manipulation.
How do I override my electronic parking brake?
To override the electronic parking brake, the driver needs to push the switch backwards or press the EPB button on the dashboard, the electric parking brake problem emergency brake system light on the instrument cluster goes out, indicating that the electric parking brake is disengaged.
There are many reasons why Honda Civic electric parking brake problem can happen. It’s important to troubleshoot the issue and fix it if possible.
The usage of an electronic parking brake has resulted in two extremely important applications in automobiles.
One example is the automated holding system, which applies the parking brake as soon as the automobile comes to a complete stop.
This is especially useful for automobiles with automatic transmissions since it eliminates the need for the driver to maintain his foot on the brake pedal when stopping for brief periods of time on the road (e.g. at a traffic light).
Furthermore, as the system ages, you may have certain frequent issues with the electric parking brake. Knowing how to solve these issues will save you time, energy, and stress.